Basic Info.
Transport Package
Wooden Crate
Specification
Width(1000mm)*Hight(2300mm)*Depth(1500mm)
Product Description
VSG1000 series high-voltage solid-state soft starter
1. With the world most leading background monitoring system, our product is the perfect integration of intelligent manufacturing and artificial intelligence
2. Adopting the most advanced special chip for motor control, with high calculation accuracy, fast response, and high reliability
3. Using solid-state high-voltage and high-power components, small size, low heat generation, fast response time, good starting consistency, and low maintenance
4. The soft stop function is adopted to make the load slow down smoothly and eliminate the water hammer effect of pump loads
5. Adopting full digital control, smoother, more stable start and stop, which guarantees high reliability for heavy load industrial applications
7. It uses a standard high voltage cabinet with five defense functions
8. Using digital or LCD touch panel to operate and display.
9. The interface is rich, intuitive to use, and easy to operate
Why use a solid-state soft starter?
The three-phase asynchronous motor will produce a large starting current when it is started directly. With different loads and motor configurations, the starting current can generally reach 5 ~ 9 times of the rated operating current. Such a large starting current has a great impact on the power grid, causing voltage drop of the power supply bus and affecting the normal operation of other electrical equipment on the same bus. In order to solve the transmission and distribution investment caused by the peak of power supply. In addition, the high peak torque generated by a large starting current will not only impact the motor but also affect the driven load, increase mechanical wear and affect the service life of the equipment. Using a soft starting device to start and stop the motor can control and reduce the motor current during starting and stopping to avoid the above adverse effects.
High voltage solid-state soft starters can be widely used in all walks of life. The typical loads of medium and high voltage three-phase asynchronous motors are as follows
High voltage solid-state soft starters can be widely used in all walks of life. Some loads of medium and high voltage three-phase asynchronous motors are as follows:
- Pump load
- Centrifuge
- Press
- Pumping unit
- Transmission belt
- Mixer
- Crusher
- Ball mill
- Air compressor, refrigeration compressor
- Lift, crane, tractor
- Induced draft fan, etc.
2.3kV selection table
Order model | Power (kW) | Current (A) | Voltage |
VSG1000-02-0132 | 132 | 40 | 2.3 kV |
VSG1000-02-0250 | 250 | 80 |
VSG1000-02-0315 | 315 | 100 |
VSG1000-02-0400 | 400 | 125 |
VSG1000-02-0500 | 500 | 160 |
VSG1000-02-0630 | 630 | 200 |
VSG1000-02-0800 | 800 | 250 |
VSG1000-02-1000 | 1000 | 315 |
VSG1000-02-1250 | 1250 | 400 |
VSG1000-02-1600 | 1600 | 500 |
VSG1000-02-2000 | 2000 | 630 |
VSG1000-02-2500 | 2500 | 800 |
VSG1000-02-3150 | 3150 | 990 |
3KV/3.3kV selection table
Order model | Power (kW) | Current (A) | Voltage |
VSG1000-03-0160 | 160 | 40 | 3kV/3.3 kV |
VSG1000-03-0315 | 315 | 80 |
VSG1000-03-0400 | 400 | 100 |
VSG1000-03-0500 | 500 | 125 |
VSG1000-03-0630 | 630 | 160 |
VSG1000-03-0800 | 800 | 200 |
VSG1000-03-1000 | 1000 | 250 |
VSG1000-03-1250 | 1250 | 315 |
VSG1000-03-1600 | 1600 | 400 |
VSG1000-03-2000 | 2000 | 500 |
VSG1000-03-2500 | 2500 | 630 |
VSG1000-03-3150 | 3150 | 800 |
VSG1000-03-4000 | 4000 | 990 |
4.16KV selection table
Order model | Power (kW) | Current (A) | Voltage |
VSG1000-04-0230 | 230 | 40 | 4.16 kV |
VSG1000-04-0450 | 450 | 80 |
VSG1000-04-0560 | 560 | 100 |
VSG1000-04-0710 | 710 | 125 |
VSG1000-04-0900 | 900 | 160 |
VSG1000-04-1120 | 1120 | 200 |
VSG1000-04-1400 | 1400 | 250 |
VSG1000-04-1800 | 1800 | 315 |
VSG1000-04-2240 | 2240 | 400 |
VSG1000-04-2800 | 2800 | 500 |
VSG1000-04-3550 | 3550 | 630 |
VSG1000-04-4500 | 4500 | 800 |
VSG1000-04-5600 | 5600 | 990 |
6KV selection table
Order model | Power (kW) | Current (A) | Voltage |
VSG1000-06-0315 | 315 | 40 | 6 kV |
VSG1000-06-0630 | 630 | 80 |
VSG1000-06-0900 | 900 | 100 |
VSG1000-06-1120 | 1120 | 125 |
VSG1000-06-1400 | 1400 | 160 |
VSG1000-06-1800 | 1800 | 200 |
VSG1000-06-2240 | 2240 | 250 |
VSG1000-06-2800 | 2800 | 315 |
VSG1000-06-3550 | 3550 | 400 |
VSG1000-06-4500 | 4500 | 500 |
VSG1000-06-5600 | 5600 | 630 |
VSG1000-06-7100 | 7100 | 800 |
VSG1000-06-8000 | 8000 | 990 |
10KV selection table
Order model | Power (kW) | Current (A) | Voltage |
VSG1000-10-0560 | 560 | 40 | 10 kV |
VSG1000-10-1120 | 1120 | 80 |
VSG1000-10-1400 | 1400 | 100 |
VSG1000-10-1800 | 1800 | 125 |
VSG1000-10-2240 | 2240 | 160 |
VSG1000-10-2800 | 2800 | 200 |
VSG1000-10-3600 | 3600 | 250 |
VSG1000-10-4500 | 4500 | 315 |
VSG1000-10-5600 | 5600 | 400 |
VSG1000-10-7100 | 7100 | 500 |
VSG1000-10-9000 | 9000 | 630 |
VSG1000-10-11200 | 11200 | 800 |
VSG1000-10-14000 | 14000 | 990 |
Performance Specifications Rated working voltage | 23KV ~ 15kV is optional. The allowable fluctuation is + 10% - 15%. See the selection comparison table for details |
Rated working current | 40A ~ 990A are optional. See the selection comparison table for details |
Adaptive motor power | 130kW ~ 20000KW, see type selection comparison table for details |
Motor type | Three phase squirrel cage asynchronous motor |
Rated operating frequency | 50Hz±1Hz |
Control power supply | AC220V.+10%15% |
operation panel | Digital operation panel, optional LCD touch screen panel |
Electrical isolation | The control adopts optical fiber isolation and the power supply adopts magnetic coupling isolation |
Degree of protection | IP30. Higher protection level can be customized |
Cooling mode | Natural cooling, other requirements can be customized |
Wiring mode | Down in and out, other requirements can be customized |
Starting times | ≤ 10 times / hour. Higher requirements can be customized |
Protection function | Phase loss protection, overload protection, overcurrent protection, under current protection, under voltage protection, current imbalance protection, start timeout alarm, high voltage cabinet door opening and power-off protection, external fault interlocking function, BOD protection (optional) |
control function | Current limiting start, voltage ramp start, ramp plus limiting start, pulse jump start, voltage ramp stop (soft stop) |
Soft start time | 2 ~ 120 seconds adjustable |
Soft stop time | 1 ~ 120 seconds adjustable |
Initial voltage | 20% ~ 80% of rated voltage adjustable |
Current limiting starting limit | 150% ~ 500% of rated current adjustable |
Overcurrent detection threshold
| 400% ~ 1500% of rated current adjustable |
communication interface
| RS485 communication interface (supporting Modbus Protocol) optional PROFIBUS-DP network interface |
Cabinet size | 1000mm wide × 2300mm high × 1500mm deep |
ambient temperature | Working: 0 ~ + 60 ºC (2% derating for every 1 ºC above 45 ºC) storage: - 25 ~ + 70c |
ambient humidity | ≤ 95% 6 non condensing, optional temperature and humidity controller |
Working height | Altitude ≤ km (no capacity reduction within 1km, 1% reduction for every 100m above 1km) |
International Standards and specifications- Standard voltage level (3 / 3.3 / 4.16 / 6 / 6.6 / 10 / 11KV)
- Global standards ISO
- Environmental requirements (RoHS index, limiting the use of certain hazardous substances in electronic and electrical equipment)
- GB/T 19001-2016 idt ISO9001: 2015
ISO 45001:2018
GB/T 24001 -2016 idt ISO14001: 2015
AAA credit rating
Test standards:
EN IEC 61800-3: 2018
EN 61000-3-12: 2011
EN 61000-3-11: 2000
Company Profile
Other products we manufacture
Application fieldsFAQ:Q 1: Are you a trading company or a manufacturer?We are a factory.Q 2: How long is your lead time?It depends on the technical solution you need, but it usually takes about 40~60 days. For more specific information, please feel free to ask us.Q3: Do you provide samples? Is it free or extra?Yes, we provide samples, and we charge sample fee and freight.Q4:How to ensure product quality?We strictly follow the ISO9001 quality management system, and the products will not leave the factory until they pass the quality inspection and test.PS:
If you need more detailed information, accurate quotation and delivery date, please feel free to contact us.
Address:
Buildings 21 and 24, Jinan Sino German Industrial Park, No. 8, Zidong Avenue, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 9000, ISO 14001
Company Introduction:
Vesige Electric (Shandong) Co., Ltd is a multinational enterprise providing equipment and solutions for energy conservation, energy emission reduction, smart grid, and new energy applications. In Vesige electric, we are responsible for the RD, production, sales, installation, commissioning, and technical services of high and low voltage converters, soft starters, high and low voltage electrical equipment, active power filters, SVG reactive power compensation devices, capacitor cabinets, and charging piles.
As a world-leading industrial equipment manufacturer, it has independently researched and developed products that cover many important fields such as new energy, intelligent equipment, environmental protection, rail traffic, electric power, and the chemical industry. Focusing on the field of industrial control, energy conservation and emission reduction, smart grid, and new energy, the company is committed to providing customers with high-efficiency and stable technical solutions, continuously improving energy utilization efficiency, and striving to become a leader in the field of industrial automation.
Our values: Integrity, Professionalism, Pragmatism, and Contribution to the development of modern industry!
As a leading industrial equipment manufacturer in the world, it has independently developed relevant products in the following fields:
1. High, medium, and low voltage frequency converter
2. High, medium, and low voltage soft starter
3. Medium and high voltage switchgear and intelligent equipment
4. Intelligent substation
5. Power automation
6. EMC energy services
7. Energy storage unit
8. Electric vehicle charging pile
9. Wind power converter
10. Power supply
11. Intelligent distribution network automation
12. Box type mobile energy storage power station
13. Ring network cabinet
14. Chemical energy storage battery
15. Reactive power compensation and harmonic control
16. RFID product series
17. EPC services
18. Electrical Instruments
19. An automatic verification system of intelligent electricity meter
20. Automated logistics system
21. Intelligent electric energy meter
22. Electric energy meter metering box
23. Energy meter turnover box